Tips: Using Resetter Software for Epson Printer without Change Date Setting

Some software resetter or adjustment program for epson are need date setting at computer to use the software without error. sometime change date setting in computer very disturb. In fact there are some ways to use software resetter or adjustment program for epson without changing date setting in computer and without error.

This step :
A. Using bat file or Create bat file

Create one bat file and copy this code. You can use notepad to create it. Place the bat file at the same folder with the adjustment program.

@echo off
echo %date% > currdate.txt
date 11-07-09
rd C:\adjust~1 /s/q
REG DELETE HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG\ /f
start/wait AdjProg.exe
date < currdate.txt
del currdate.txt
rd C:\adjust~1 /s/q
REG DELETE HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG\ /f

Note : replace red font with date setting for adjutment program.

B. Using Date Cracker Software:

* Download and install Date Cracker and run the software.
* Click Add button, enter program description (example: Resetter Epson C92)
* Click “…” button the select the adjutment software then click open.
* Type date setting for the adjustment program in the simulated run date.
* Click run button to run the software.


All this methods has been tested

Date Cracker Software Download

Readmore »» Tips: Using Resetter Software for Epson Printer without Change Date Setting

Lamp projectors reset

Some projectors require the user to reset the lamp hour counter in order for the new lamp to become active.
Please note these are guidelines only, for complete installation instructions please consult your projector's manual.

SONY
• Turn off the projector.(connect powercable, projector off)
• Press the "RESET" button on the remote control and then press channel Left and then press channel Right.
• Press Enter buttom.
• Turn on the projector

3M
• Turn on the projector.
• Press the "RESET" button on the remote control for approximately 3 seconds until a dialog box is displayed.
• Select the "RESET" using the button.
• Your lamp counter will now be reset.

ASK
There are two common methods to reset the lamp counter on these projectors:
Method 1:
• Press the decrease volume button on the remote and then the increase volume button within 3 seconds.
• The LED light on the projector will turn green.
• Turn on the projector.
Method 2:
• Turn on the Projector.
• Open the standard menu using the remote.
• Then select "Setup" or "Service" depending on your projector model.
• Then select "Reset Lamp Timer"
BenQ
• Turn on the projector
• While the projector running, press the MENU button.
• Select "OPTION" on the menu using the 5/6 buttons, then press the ENTER button.
• Select the "LAMP TIME" using the 5/ 6 buttons, then press and hold the RESET button for 3 seconds.
• Select "RESET" using the 5 button.

Boxlight
• Turn on the projector.
• Press the "MENU" button and the on-screen menu will appear.
• Press 3/4 button to remove the red frame pointer to the Setting Menu Icon .
• Press the 6 button to move the red frame pointer to the Lamp Counter Reset item and then press SELECT button.
• The message "Reset Lamp Counter?" appears. Move the pointer to "" and then press SELECT button.
• Another confirmation dialog box appears and select "" to reset the Lamp Replace Counter.

Canon
• Turn on the projector.
• Press the "MENU" button and the on-screen menu will appear.
• Press 3/4 button to remove the red frame pointer to the Setting Menu Icon .
• Press the 6 button to move the red frame pointer to the Lamp Counter Reset item and then press SELECT button.
• The message "Reset Lamp Counter?" appears. Move the pointer to "" and then press SELECT button.
• Another confirmation dialog box appears and select "" to reset the Lamp Replace Counter.

Christie
• Turn on the projector.
• Press the "MENU" button and the on-screen menu will appear.
• Press 3/4 button to remove the red frame pointer to the Setting Menu Icon .
• Press the 6 button to move the red frame pointer to the Lamp Counter Reset item and then press SELECT button.
• The message "Reset Lamp Counter?" appears. Move the pointer to "" and then press SELECT button.
• Another confirmation dialog box appears and select "" to reset the Lamp Replace Counter.

Dell
• Press "MENU" on the remote or control panel to open the on screen display menu.
• Use the 3/4 keys and the section called "Lamp Setting"
• Use the 5/6 keys to select "Lamp Reset"
• Select "YES"
Dukane
• Turn on the projector.
• Press the "RESET" button on the remote control for approximately 3 seconds until a dialog box is displayed.
• Select the "RESET" using the button.
• Your lamp counter will now be reset.

Eiki
• Turn on the projector.
• Press the "MENU" button and the on-screen menu will appear.
• Press 3/4 button to remove the red frame pointer to the Setting Menu Icon .
• Press the 6 button to move the red frame pointer to the Lamp Counter Reset item and then press SELECT button.
• The message "Reset Lamp Counter?" appears. Move the pointer to "" and then press SELECT button.
• Another confirmation dialog box appears and select "" to reset the Lamp Replace Counter.

Elmo
• Turn on the projector.
• Press the "RESET" button on the remote control for approximately 3 seconds until a dialog box is displayed.
• Select the "RESET" using the button.
• Your lamp counter will now be reset.

Hitachi
• Turn on the projector.
• Press the "RESET" button on the remote control for approximately 3 seconds until a dialog box is displayed.
• Select the "RESET" using the button.
• Your lamp counter will now be reset.

HP
• Press "MENU" on the remote or control panel to open the on screen display menu.
• Use the 3/4 keys and the section called "Lamp Setting"
• Use the 5/6 keys to select "Lamp Reset"
• Select "YES"

Infocus
There are two common methods to reset the lamp counter on these projectors:
Method 1:
• Press the decrease volume button on the remote and then the increase volume button within 3 seconds.
• The LED light on the projector will turn green.
• Turn on the projector.
Method 2:
• Turn on the Projector.
• Open the standard menu using the remote.
• Then select "Setup" or "Service" depending on your projector model.
• Then select "Reset Lamp Timer"

Liesegang
• Turn on the projector.
• Press the "RESET" button on the remote control for approximately 3 seconds until a dialog box is displayed.
• Select the "RESET" using the button.
• Your lamp counter will now be reset.

NEC
• Press the "OFF" or "HELP" button on the remote control for a minimum of 10 seconds while in standby mode.
• When the lamp clock is reset to zero the status indicator light will go out.

Optima
• Press "MENU" on the remote or control panel to open the on screen display menu.
• Use the 3/4 keys and the section called "Lamp Setting"
• Use the 5/6 keys to select "Lamp Reset"
• Select "YES"

Panasonic
• Press the "POWER" button until an image is projected onto the screen.
• Press the "MENU" button to display the main on screen menu and then press the F/G buttons to select "OPTION".
• Press the "ENTER" button to display the "OPTION" menu, and then press the 5/6 buttons to select "LAMP RUNTIME".
• Press and hold the "ENTER" button for approximately 3 seconds.
• The "LAMP RUNTIME" will change to "TIME RESET [POWER OFF]".
• The projector will then be powered down.

Panasonic (pt-m1e)
• Press the "POWER" button until an image is projected onto the screen.
• Press the "MENU" button to display the main on screen menu and then press the F/G buttons to select "OPTION ".
• Press the "ENTER" button to display the "OPTION" menu, and then press the 5/6 buttons to select "LAMP RUNTIME /LIFE RUNTIME".
• Press and hold the "ENTER" button (REMOTE) for approximately 3 seconds.(panel will be show RED)
• The "LAMP RUNTIME" will change to "TIME RESET [POWER OFF]".
• The projector will then be powered down.

Proxima
There are two common methods to reset the lamp counter on these projectors:
Method 1:
• Press the decrease volume button on the remote and then the increase volume button within 3 seconds.
• The LED light on the projector will turn green.
• Turn on the projector.
Method 2:
• Turn on the Projector.
• Open the standard menu using the remote.
• Then select "Setup" or "Service" depending on your projector model.
• Then select "Reset Lamp Timer"

Toshiba
• Turn on the projector
• While holding down "ON/STANDBY", "MENU" and "INPUT" simultaneously, plug the power cord into the mains outlet
• The lamp timer is reset automatically
• Check that “ 0H” appears on the lamp timer of the status display.
• NOTE : after resetting the lamp timer , turn off the projector using the “ON/ STANBY” buttom,then turn off the main power switch.

Viewsonic
• Turn on the projector.
• Press the "RESET" button on the remote control for approximately 3 seconds until a dialog box is displayed.
• Select the "RESET" using the button

Readmore »» Lamp projectors reset

Reseting Canon Printer Procedure

Canon Waste Ink Tank Reset Procedure :

Canon GENERIC "S" SERIES
Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button, plug in electric cord.

(3) Release the RESUME button, Next press and release the RESUME button two (2) times in succession.
Note: you are still holding the POWER button). The printer's carriage will "reset" or move momentarily. If the above was properly performed the printer will enter the "Service Mode".

(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.

1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

Canon i320, i255
Waste Ink Counter Reset:
Step 1 : Manual for service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
or Step 1: Manual for service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (LED) should be green.
4. Press and release the RESUME button , the indicator (LED) should be orange.
5. Press and release the RESUME button again, the indicator (LED) should be green.
6. Release both buttons.
step 2 : Software for Permanant
1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3. Choose (SET DESTINATION 1) And it should be reset.
Remark "After service mode Pls use software for permanent reset"

Canon PIXMA iP1000
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
step 2 : Software for Permanant
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark "After service mode. Use software for permanent reset"

Canon PIXMA iP1500
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
step 2 : Software for Permanant
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark "After service mode Pls use software for permanent reset"

Canon i850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

Canon S450 Printer
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data

Canon BJC1000Series

1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

Canon BJC-2000 BJC-2100 Series
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650
Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME
Canon BJC-5000
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
Canon BJC-5100 Self Test
Switch Printer off. Hold Power for 1 beep.
Waste Counter Reset
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6: Press Power to set data
Canon BJC-600 BJC-600e BJC-610 BJC-620
1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps
Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
1: Unplug Power Cord
2: Hold POWER and RESUME buttons
3: Plug in Power Cord
4: Release buttons after the printers starts up
5: Hold CARTRIDGE and RESUME
6: Press POWER
7: Release all buttons after the beeps
8: Press CARTRIDGE 16 times
9: Press RESUME
10: Unplug the Power cord

Canon BJ-30 BJC-35v BJC-70
F14 Error Reset
1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press <> Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then re-plug printer
Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
You are now in Service mode.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Canon S900, S820, S750, S520
1. Turn off the printer.
2. Press and hold the RESUME button, then press and hold the POWER button.
3. While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
4. The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
5. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

6. After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

Canon S9000
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Canon MPC190
Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Readmore »» Reseting Canon Printer Procedure

HP maintenance and reset

Clear the HP Maintenance Service Message :

HP Printer type IIISi :
Press ONLINE until the light goes off
Hold down MENU until PCL CONFIG MENU appears
Press the MENU key until SERVICE MSG=ON* appears
Press the + or - key to change display to SERVICE MSG=OFF
Press ENTER/RESET MENU key to turn message off, the * should appear, then press ONLINE
HP 4Si Printers:
Press ONLINE until the light goes off
Press MENU until CONFIG MENU appears
Press the ITEM key until SERVICE MSG=ON* appears
Press the + or - key to change display to SERVICE MSG=OFF
Press the ENTER key to turn message off, the * should appear, then press ONLINE

HP 5Si printers:
Press MENU key 4 times for CONFIG MENU
Press ITEM to display SERVICE MESSAGE=OFF
Press ENTER
Press ONLINE

HP 4000/4050/4100/5000 Printers:
Turn the printer off

Hold down the left side of the ITEM and VALUE +/- keys, turn the printer on and wait until RESET MAINTENANCE COUNT is displayed and then release the keys

HP 4500/4550 Printers:
Turn the printer off

Hold down the CANCEL JOB and SELECT keys and turn the printer on, then wait until the display goes blank and the three LED's come on

Press the right side of the MENU key, then press the SELECT key
You will enter SERVICE MODE after the normal test completes
Press the ITEM key until the FUSER MAINTENANCE COUNT appears
Press VALUE +/- to change to zero
Press SELECT to save
Press GO; the printer should return to READY

HP 8000/8100/8150 Printers:
Press the MENU button until the display reads CONFIGURATION MENU
Press the ITEM button until the display reads SERVICE MESSAGE = ON/OFF
Select OFF*
Press SELECT to save

Turn printer off

Hold the VALUE MINUS and ITEM MINUS buttons while turning the printer back on Hold buttons down until display reads RESET MAINT/COUNTand then release both buttons

HP 9000 Printers:
Turn the printer off
Press and hold the CHECK key
Power on the printer
Release the CHECK key after all three lights come on The display should read SELECT LANGUAGE

Press the up arrow until MAINTENANCE KIT is displayed, then press the CHECK key again and the maintenance kit count has been reset

HP Color LaserJet 4500/4550 Printers (TRANSFER KIT RESET):
Press the MENU button until the RESETS MENU is displayed
Press the ITEM button until TRANSFER KIT SELECT IF DONE is displayed
Press the SELECT button
HP Color LaserJet 4500/4550 Printers (FUSER KIT RESET):
Press the MENU button until the RESETS MENU is displayed
Press the ITEM buton until FUSER KIT SELECT IF DONE is displayed
Press the SELECT button
Press the GO button to return to READY

HP Color LaserJet 4600 Printer (IMAGE TRANSFER KIT (ETB) RESET):
After Maintenance is performed, the display should read NEW TRANSFER KIT =
Press the down arrow to highlight YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW TRANSFER KIT and select

HP Color LaserJet 4600 Printer (FUSER KIT RESET):
After Maintenance is performed, the display should read NEW FUSER KIT =

Press the down arrow to highlight YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW FUSER KIT and select

HP Color LaserJet 8500/8550 Printers (TRANSFER KIT RESET):
Press the MENU button until the RESETS MENU is displayed
Press the ITEM button until RESET TRANSFER LIFE COUNT is displayed
Press the SELECT button to reset, then GO to return to READY

HP Color LaserJet 8500/8550 Printers (FUSER KIT RESET):
Press the MENU button until the RESETS MENU is displayed
Press the ITEM buton until RESET FUSER LIFE COUNT is displayed
Press the SELECT button to reset
Press the GO button to return to READY

Readmore »» HP maintenance and reset

Error code Canon IP1200, IP1300, IP1700, IP1880, IP1980

This is the error code printer Canon IP1200, IP1300, IP1700, IP1880, IP1980.
light blink Indicator:
3x orange 1x Green = mekanik error
4x orange 1x green = absorber full /reset with software tools
5x orange 1x green = cartirdge black/colour error
7x orange 1x green = cartirdge black/colour error
8x orange 1x green = absorber full / reset with software tools
12x - 17x orange 1x green = cartridge detection error
DOwnload resetter

Readmore »» Error code Canon IP1200, IP1300, IP1700, IP1880, IP1980

Resetter Printer Canon IP1880

To reset manually Ink Full Tank, you can try this methods :
1. Turn on Printer Canon iP 1880
2. Push and Hold resume button about 2 minutes
3. Release resume button
4. Printer will back in normal again
5. Then use the software to reset permanent ---> reset tool Download


just for this program resetter, resetter can also use this type for the printer canon Ip 1100, 1800, 2500, 1880, 1980.
Using this software easily, check the "eepRom Clear" and "Cleaning". Then in the options Tab Clear Waste Ink Counter, select the "Platen" and "Main" to reset the indicator into position 0.
On this software, Ip1980 was known as the 1800 ASA. By knowing the type id printer, make it easier to reset the printer select with lock release button, and set the destination IP to ASA in 1800 (only for the printer ip 1980) -> printer is different settings, by pressing the button to end the set. If successful indicator cartridge go to full, but sometimes no effect. To find out more about your printer, you can select the "device id". Tab to "Set Destination" to adjust your printer type. If the facility is non-active means that your printer type not support this mode.

Readmore »» Resetter Printer Canon IP1880

Reset MP390 Waste Ink Full Tank

1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset

2)Select Test mode which is like the last avalabe selection

3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button

The menu will now say EEPRON Clear
Select Ink count which is option (0) and press set

Then press Stop/Reset Followed by the power button and then wait for it to restart.

Readmore »» Reset MP390 Waste Ink Full Tank

Adjustment Program for Stylus C40UX ,C40SX, C20UX, C20SX C61 C62

1. Operating Environment: Windows95 OSR2.0 or higher and Windows98.
(for Windows95)LPT1-LPT3 are used.
(for Windows98)LPT1-LPT3 and EPUSB1-EPUSB3 are used.
2. How to use the Adjustment Program:
Copy the Adjustment Program on the desktop, and then, execute the program.
3. Cautions:
1) When you confirm the function of USB port properly, you must use Windows98
pre-installed PC. It cannot function properly on Windows95.
2) When you operate this program on the Windows95 or Windows98, you cannot
operate it with Status Monitor is running. Close Status Monitor on Task tray
before start the Adjustment Program.
3) Do not change the setting for “Font size” in “settings tab” of the
“Display Property”window.
4) Please do not start the Adjustment Program before connecting the printer with a parallel I/F cable or USB I/F cable. If you do not follow the instruction, the program will freeze.
5) Please do not send any commands during Check Pattern printing.
6) In case of turning off the printer, or the parallel I/F cable or USB I/F
cable is removed during booting the Adjustment Program, please restart the Adjustment Program.

Adjustment Program for Stylus C40UX / C40SX / C20UX / C20SX : Download
Adjustment Program for Stylus C61/C62: Download

Readmore »» Adjustment Program for Stylus C40UX ,C40SX, C20UX, C20SX C61 C62

howto refill a printer cartridge without ink(at your home)!

Warning, this is a spoof video. The ink level indicator is controlled by the green computer chip. Doing anything else on the cartridge itself (as shown in the video), will not change the ink level. Be careful.

Readmore »» howto refill a printer cartridge without ink(at your home)!

Resetter Epson Stylus C91, C92

Service Adjustment Program



To reset waste ink pad counter epson C91 or epson C92 printers you have to:
- Run the program
- Choose Particulare Adjustment Mode - Choose Waste Ink Pad Counter
- Press INITIALIZE!
Here it is! The waste ink counter resets to ZERO!

Resetter C91- C92 : Download

Readmore »» Resetter Epson Stylus C91, C92

Resetter Epson Stylus C90 Software

This resetter Software for Epson printer C90. Reset your waste ink pad counter. If any question you can ask to me how to run Adjustment Program. Thank you. and Happy RESET!!
Note : tell your friend about my site. Maybe your friends is very needed.
Download Link
stylus photo C90 Version Indonesia download

Readmore »» Resetter Epson Stylus C90 Software

Reset Ink Counter/Level Canon iP1000

This printer is low budget, the one that I like most is the fast printing.

The problem that I have when using this printer is when the ink waste absorber is full, and he start to blink. Ok guys, Here's some tips for you who still use this printer.

How to physically change the ink waste absorber? Pixma ip1000
The waste ink absorbers can be found at the bottom of the printer case.

Normally you'll have to open the printer case, loose the screws of the print unit and remove the hole print unit from the lower part of the printer case.

4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again

If your IP1000 Blinking try this Tips :

Step 1: Manual for Service mode
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 2 : Software for Permanent
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500", Downloadh The Software here
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now work normally

Notes. Before you decide to reseting the waste ink counter, you should really clean up the ink absorber, or else you will find the ink waste absorber overflow.

Readmore »» Reset Ink Counter/Level Canon iP1000

Resetting Epson Stylus C58, Software

This Epson C58 most of them are modifing because the refill ink are often makes trouble
Download here and more resetter for another epson printer in here
















You can also reset and fix your Epson R270, R240, R250, R220, RX700, RX600, RX3700, RX3800, CX1500, CX2800, C63, C79, CX3900, C59, C45, CX4100, R1800, CX5900, C90.

Some tips if you still get error after changing the date:
1. delete folder ;C:\Adjustment Program\Stylus C58

2. delete registry HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG\Stylus C58

delete the folder registry not just the key

3. Don't forget to set the date into 9 Nop 06 before running the program

Readmore »» Resetting Epson Stylus C58, Software

TUTORIAL RESETTER PRINTER EPSON STYLUS T11

Before using the Software Resetter Epson Stylus T11, make sure:

a. Driver Printer Epson Stylus T11 already installed first, and make sure the printer is connect to the computer

b. Make sure you have the "Software Resetter Printer Epson Stylus T11".

c. Make sure that the damages requested in the printer reset counter (usually the printer lights all glowing red)

Before using the Software Resetter Epson Stylus T11, change the settings on your computer so that the program resetter Epson T11 may be the way without any error.

To change, click Start - Control Panel - Date and Time (Classic View for the model). if you model the Control Panel Category View, select Date, Time, Language and Regional Options, then select Date and Time settings to change the date.

The computer date to 11 April 2008


Here are step by step to do the reset the Waste Ink Pad Counter Epson T11:

1.Download Software Resetter Printer Epson Stylus T11.
2. Resetter Epson T11 extract it.
3. Turn on the printer.
4. AdjProg.exe Run the file and click Accept.
5. Select a particular adjustment mode.
6. Continue by selecting the Waste Ink Counter pad and then click OK.
7. Click the Check button, to read the Waste Ink Counter Pad, and wait until the reading is completed.
8. Click initialization to reset waste ink pad counter to 0 and click Finish.
9. Turn off the printer, wait a while, and then turn the printer back.
10. Wait until the printer completes the process of calibration, and printer will be normal again.
11. Continue with Printer Test Page.
Download resetter t10 - t11
Download resetter t11

Readmore »» TUTORIAL RESETTER PRINTER EPSON STYLUS T11

Manually Reset For Epson Stylus Color Printer

EPSON Stylus Color

Pressing and holding ALT+FONT+LOAD+PAUSE buttons combination, press POWER button.
Release all buttons.

EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button, until all leds will blink.

EPSON Stylus Color 680
Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will blink.

EPSON Stylus Color 800, 850
Pressing and holding LOAD, CLEANING Color and CLEANING Black buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release CLEANING Color button, You will see leds blinking.

EPSON Stylus Color 900, 980
Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button, You will see blinking INK OUT led.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.

EPSON Stylus Photo 785, 895
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.

EPSON Stylus Photo 890, 1280, 1290
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.

EPSON Stylus Color 3000
Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons turn on printer.
Release all buttons.

EPSON Stylus Color 300
Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.

EPSON Stylus Color 400, 600
Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release LOAD/EJECT button.

EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160
Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button, until all leds will blink.

EPSON Stylus Color 800, 850
Pressing and holding LOAD, CLEANING Color and CLEANING Black buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release CLEANING Color button, You will see leds blinking.

EPSON Stylus Color 900, 980
Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button, You will see blinking INK OUT led.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.

EPSON Stylus Photo 785, 895
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.

EPSON Stylus Photo 890, 1280, 1290
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.

EPSON Stylus Color 680
Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will blink.

Readmore »» Manually Reset For Epson Stylus Color Printer

Service Utility for Epson Stylus Printers.

SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.

NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!

Program screenshots:









Epson Model/type supported :
Epson Stylus Сolor 400 supported
Epson Stylus Сolor 440 supported
Epson Stylus Color 480 LPT supported
Epson Stylus Color 480SXU / 580 supported
Epson Stylus Сolor 600 supported
Epson Stylus Сolor 640 supported
Epson Stylus Сolor 660 supported
Epson Stylus Сolor 670 supported
Epson Stylus Color 680 / 777 supported
Epson Stylus Сolor 740 supported
Epson Stylus Сolor 760 supported
Epson Stylus Сolor 800 / 850 supported
Epson Stylus Сolor 860 supported
Epson Stylus Color 880 supported
Epson Stylus Color 900 / EM-900C supported
Epson Stylus Color 980 supported
Epson Stylus Сolor 1160 supported
Epson Stylus Color 1520 supported
Epson Stylus Color 3000 supported
Epson Stylus C20 / C40 / CL-750 supported
Epson Stylus C41 / C42 / C43 / C44 / C45 / C46 / C47 / C48 ** supported
Epson Stylus C50 supported
Epson Stylus C60 supported
Epson Stylus C61 / C62 ** supported
Epson Stylus C63 / C64 ** supported
Epson Stylus C65 / C66 and PE ** supported
Epson Stylus C67 / C68 / D68 and PE ** supported
Epson Stylus C70 ** supported
Epson Stylus C80 ** supported
Epson Stylus C82 ** supported
Epson Stylus C83 / C84 ** supported
Epson Stylus C85 / C86 and PE ** supported
Epson Stylus C87 / C88 / D88 and PE ** supported
Epson Stylus Photo RX420 / RX425 / RX430 ** supported
Epson Stylus Photo RX500 / RX510** supported
Epson Stylus Photo RX520 ** supported
Epson Stylus Photo RX600 / RX610 ** supported
Epson Stylus Photo RX620 ** supported
Epson Stylus Photo RX700 ** supported
Epson Stylus CX3100 / CX3200 ** supported
Epson Stylus CX3500 / CX3600 / CX3650 ** supported
Epson Stylus CX3700 ** supported
Epson Stylus CX3800 / CX3810 / DX3800 ** supported
Epson Stylus CX4500 ** supported
Epson Stylus CX4600 ** supported
Epson Stylus CX4100 / CX4200 ** supported
Epson Stylus CX4700 / CX4800 ** supported
Epson Stylus DX4200 / DX4800 ** supported
Epson Stylus CX5100 / CX5200 ** supported
Epson Stylus CX5300 / CX5400 ** supported
Epson Stylus CX6400 / CX6600 ** supported
Epson Stylus CX6300 / CX6500 ** supported
Epson Stylus CX7800 ** supported
Epson PictureMate supported
Epson Stylus Photo supported
Epson Stylus Photo EX supported
Epson Stylus Photo 700 / IP-100 supported
Epson Stylus Photo 750 / PM-770C supported
Epson Stylus Photo 780 / 790 / PM-780C supported
Epson Stylus Photo 810 / 820 supported
Epson Stylus Photo 820 ** supported
Epson Stylus Photo 825 / 915 supported
Epson Stylus Photo 830 / 830U ** supported
Epson Stylus Photo 870 / PM-875DC supported
Epson Stylus Photo R200 / R210 ** supported
Epson Stylus Photo R220 / R230 ** supported
Epson Stylus Photo R300 / R310 ** supported
Epson Stylus Photo R320 ** supported
Epson Stylus Photo R800 / PX-G900 ** supported
Epson Stylus Photo R1800 ** supported
Epson Stylus Photo R2400 ** supported
Epson Stylus Photo 890 supported
Epson Stylus Photo PM-890C supported
Epson Stylus Photo PM-A700 ** supported
Epson Stylus Photo PM-G720 ** supported
Epson Stylus Photo PM-970C ** supported
Epson Stylus Photo 895/ 785EPX supported
Epson Stylus Photo 900 ** supported
Epson Stylus Photo 925 / 935 ** supported
Epson Stylus Photo 950 / 960 / PM-950C ** supported
Epson Stylus Photo 1200 / PM-3000C supported
Epson Stylus Photo 1270 / PM-3300C supported
Epson Stylus Photo 1280 / PM-3500C supported
Epson Stylus Photo 1290 supported
Epson Stylus Photo 2000P supported
Epson Stylus Photo 2100 ** supported
Epson Stylus Photo 2200 / PM-4000EPX ** supported
Epson Stylus Pro 5000 / PM-5000C supported

Latest versions changes:

New in 4.30:
- support for R270
- support for R240
- support for R340
- support for CX2800
- support for CX3900
- support for CX4900
- support for CX5900
- support for C58/C59
- support for RX640
- improved support for C2100/2200
- improved support for RX700
- improved support for R2400
- improved support for 785EPX/825/895/915
- some other improvements and bug fixes

New in 4.20:
- support for CX4200/CX4700/CX4800/DX4200/DX4800
- support for C47/C48
- support for RX430
- support for CX6500/CX6300
- improved support for CX6400/CX6600
- improved support for RX500/RX510
- improved support for RX600/RX610
- improved support for R1800
- improved support for CX3700/CX3800/DX3800/DX3850
- improved support for C67/C68/D68
- improved support for C87/C88/D88
- many new chip models supported
- some other improvements and bug fixes

New in 4.10:
- support for PM-970C
- support for PictureMate
- support for RX700
- support for R2400
- support for PM-A700
- support for PM-G720
- support for RX520
- support for CX7800
- support for CX4100
- support for DX3800
- support for CX3800/CX3810
- support for CX3700
- support for C67/68 and Photo Editions
- support for C87/C88/D88 and Photo Editions
- support for R220/R230
- support for R320
- support for CX4500
- support for CX3650
- various bug fixes

New in 4.00:
- ability to work with additional reset device
- support for CX4600
- support for CX5300
- support for CX5100
- support for RX420
- support for RX425
- support for RX620
- support for R1800
- improved support for almost all other printers
- improved ink freezer
- improved ink monitor, implemented status information
- protection counter reset improvements
- various bug fixes

Reset using SSC serve software :
* Run and install SSC software.
* Run setting in the printer model section and equalto the printer the close the setting.
* Right click mouse on ssc icon in the system tray, select “protection counter” then click “reset protection counter”, Ok.
* Turn off the printer the turn on again, and the printer should be Ok

Download v4.00
Download v4.30
Direct link Download v4.30

Note :
This is freeware project, so it is illegal to take money for this software.

Source : www.ssclg.com

Readmore »» Service Utility for Epson Stylus Printers.

Epson Stylus Color C20,C40

Since your printer consumes ink not only for printing but also for other operations like cleaning, a certain amount of ink is wasted and it is collected by the waste ink pad. Therefore, the printer counts the amount of waste ink.

Once the amount of waste ink reaches the predefined limit, the printer indicates "MAINTENANCE REQUEST" and the waste ink pad should be replaced. Also, you must reset the maintenance error condition and the waste ink counter value stored in EEPROM on the mainbord of the printer.

The adjustment program enables you to perform maintenance and adjustment functions such as:

- EEPROM initial setting
- Ink Pad Counter reset
- Initial Ink Charge
- Head ID Setting
- Top margin Adjustment
- Bi-D Adjustment
- USB ID Input

Note: The above list is related to models Epson C20 and C40 only. Other printer models may have different set of functions, and you must doublecheck the service manual for a specific printer that you are going to troubleshoot.

Warning: misuse of a program may damage printer's EEPROM! Under Window 98 only.
This service program can be Adjustment program epson Download

Readmore »» Epson Stylus Color C20,C40

Resetter epson Service Adjustment Program

Epson Stylus Color type 480, 580, 680, 777, 780, 790, 860, 1160, 61, 62, 70, 825, 830, 870, 890, 950, 1270, 1280, printer service program download it's FREE

This is the most downloads for reseters :

* stylus Color 880 Download
* stylus Color 1520,3000 Download
* stylus Color 780,790 Download
* stylus Color 925 Download
* stylus C60 Download
* stylus Photo C59 Download
* stylus Photo C20,40 Download
* stylus photo C67 Download
* stylus photo 510 Download
* stylus cx3900 Download
* stylus Photo R310 Download
* stylus Photo R210 Download
* stylus Photo C41,42,43,44,45,46 Download
* stylus Photo C58 Download
* stylus Photo C61,62 Download
* stylus photo C63,64 Download
* stylus photo C65 Download
* stylus photo C67,68 Download
* stylus photo C80,70 Download
* stylus photo 83,84,85 Download
* stylus Color 580 Download
* stylus Color 680,777 Download

Readmore »» Resetter epson Service Adjustment Program