Error code Canon IP1200, IP1300, IP1700, IP1880, IP1980

This is the error code printer Canon IP1200, IP1300, IP1700, IP1880, IP1980.
light blink Indicator:
3x orange 1x Green = mekanik error
4x orange 1x green = absorber full /reset with software tools
5x orange 1x green = cartirdge black/colour error
7x orange 1x green = cartirdge black/colour error
8x orange 1x green = absorber full / reset with software tools
12x - 17x orange 1x green = cartridge detection error
DOwnload resetter

Readmore »» Error code Canon IP1200, IP1300, IP1700, IP1880, IP1980

Resetter Printer Canon IP1880

To reset manually Ink Full Tank, you can try this methods :
1. Turn on Printer Canon iP 1880
2. Push and Hold resume button about 2 minutes
3. Release resume button
4. Printer will back in normal again
5. Then use the software to reset permanent ---> reset tool Download


just for this program resetter, resetter can also use this type for the printer canon Ip 1100, 1800, 2500, 1880, 1980.
Using this software easily, check the "eepRom Clear" and "Cleaning". Then in the options Tab Clear Waste Ink Counter, select the "Platen" and "Main" to reset the indicator into position 0.
On this software, Ip1980 was known as the 1800 ASA. By knowing the type id printer, make it easier to reset the printer select with lock release button, and set the destination IP to ASA in 1800 (only for the printer ip 1980) -> printer is different settings, by pressing the button to end the set. If successful indicator cartridge go to full, but sometimes no effect. To find out more about your printer, you can select the "device id". Tab to "Set Destination" to adjust your printer type. If the facility is non-active means that your printer type not support this mode.

Readmore »» Resetter Printer Canon IP1880

Reset MP390 Waste Ink Full Tank

1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset

2)Select Test mode which is like the last avalabe selection

3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button

The menu will now say EEPRON Clear
Select Ink count which is option (0) and press set

Then press Stop/Reset Followed by the power button and then wait for it to restart.

Readmore »» Reset MP390 Waste Ink Full Tank

Adjustment Program for Stylus C40UX ,C40SX, C20UX, C20SX C61 C62

1. Operating Environment: Windows95 OSR2.0 or higher and Windows98.
(for Windows95)LPT1-LPT3 are used.
(for Windows98)LPT1-LPT3 and EPUSB1-EPUSB3 are used.
2. How to use the Adjustment Program:
Copy the Adjustment Program on the desktop, and then, execute the program.
3. Cautions:
1) When you confirm the function of USB port properly, you must use Windows98
pre-installed PC. It cannot function properly on Windows95.
2) When you operate this program on the Windows95 or Windows98, you cannot
operate it with Status Monitor is running. Close Status Monitor on Task tray
before start the Adjustment Program.
3) Do not change the setting for “Font size” in “settings tab” of the
“Display Property”window.
4) Please do not start the Adjustment Program before connecting the printer with a parallel I/F cable or USB I/F cable. If you do not follow the instruction, the program will freeze.
5) Please do not send any commands during Check Pattern printing.
6) In case of turning off the printer, or the parallel I/F cable or USB I/F
cable is removed during booting the Adjustment Program, please restart the Adjustment Program.

Adjustment Program for Stylus C40UX / C40SX / C20UX / C20SX : Download
Adjustment Program for Stylus C61/C62: Download

Readmore »» Adjustment Program for Stylus C40UX ,C40SX, C20UX, C20SX C61 C62

howto refill a printer cartridge without ink(at your home)!

Warning, this is a spoof video. The ink level indicator is controlled by the green computer chip. Doing anything else on the cartridge itself (as shown in the video), will not change the ink level. Be careful.

Readmore »» howto refill a printer cartridge without ink(at your home)!

Resetter Epson Stylus C91, C92

Service Adjustment Program



To reset waste ink pad counter epson C91 or epson C92 printers you have to:
- Run the program
- Choose Particulare Adjustment Mode - Choose Waste Ink Pad Counter
- Press INITIALIZE!
Here it is! The waste ink counter resets to ZERO!

Resetter C91- C92 : Download

Readmore »» Resetter Epson Stylus C91, C92

Resetter Epson Stylus C90 Software

This resetter Software for Epson printer C90. Reset your waste ink pad counter. If any question you can ask to me how to run Adjustment Program. Thank you. and Happy RESET!!
Note : tell your friend about my site. Maybe your friends is very needed.
Download Link
stylus photo C90 Version Indonesia download

Readmore »» Resetter Epson Stylus C90 Software